IndigoBlu- Christmas in July Challenge (Photos and instructions on how to make one yourself)!

Hello and Good Day Everyone!

I really love using IndigoBlu products and have decided it was time to take part in their monthly challenges!
So............., here is what I decided to make for the "Christmas in July" challenge!

Items you will need to make one yourself!

Wooden Heart

White Gesso

IndigoBlu English Cottage Acrylic Paint-(postbox red, grandma's teacup, park lane)!

Large flat head paintbrush, small head paintbrush

Stamp Sets

Green Ink pads!  I used Green StaZon,  Stampin Up Old Olive & coloured the veins in with Gumball Green marker pen

Black StaZon

Scissors

Pinflair glue gel

White Card

Clear Acetate

Crystal Effects

Ball Tool and Soft Mat

FlitterGlu & Scoochy Sponge

Mega-Flake -Sheffield steel

Ribbon, Pearls & Red Gems

What to do

Always prime your wooden item first using the white gesso.
Paint the front, back and sides! Leave to dry!

Paint the item in the shades of paints you have chosen! I roughly painted my heart in grandma's teacup, then filled in the gaps with park lane.









Stamp out 7 large Holly Leaves and 3 small leaves from the stamp set "Retro Christmas" with the green ink pads!
Colour in the white areas with the marker pens!
Cut out the Holly Leaves!

With the ball tool and Mat gently press and roll the ball tool over the leaves and mistletoe to give them a curved shape!

 Paint crystal effects over the leaves and mistletoe to give them a shiny finish!

 Once the crystal effects is dry add the red gems to the holly leaves and the pearls to the mistletoe!

Spread some FlitterGlu onto a piece of sponge and use the sponge as an "Ink pad" to cover the stamp with the flitterGlu! Stamp your image several times on your wooden item!
(stamp set used "Here comes Santa")








Once you have added your glue, cover the images with the Mega-Flakes!
Gently rub all over the image and let the flakes cover the glue! Check all areas are covered! Rub off any flakes that are not needed!
Use the Schoochy sponge to take off any more of the flake and to help show up the image!

 With Black StaZon ink, stamp out the Christmas sentiment from the stamp set "Retro Christmas" onto a piece of acetate and cut out! (I used a spellbinders die to do this)! 
Turn the acetate piece over and paint the letters in postbox red using a small paintbrush!
Colour the leaves in with a green permanent marker!

Make up a small Red bow out of ribbon and thread another piece through the hold at the top of the heart as a hanger!











Glue the Mistletoe in place over the ribbon where it was threaded through the hole!
Glue the bow on top of the Mistletoe!

Stamp, colour and cut out a Robin from the "Retro Christmas" stamp set!

Glue the Holly leaves down one side of the heart then attach the acetate Christmas sentiment over the bottom part of the heart making it "Dome" a little! See photo below!
Glue two small holly leaves onto the acetate as well!

 The Finished Item!

I really hope you like this project and give it a try for yourself!

Happy Crafting xx

Altered Cotton Purse

Good Afternoon Everyone,
Here is a project I have been working on and when I shared some photos on Facebook I receive quite a number of comments so thought I would share with you how to create a purse of your own!

Front View

Back View

Altered Purse

Materials and Equipment Needed

·         Cotton Purse

·         White Gesso  

·         2 Paintbrush’s 1 x thick brush / Flat head size 1"

                                     1 x thin brush for use in softening the coloured in images

·         Glue and Seal

·         StaZon Ink

·         Stamps

·         Derwent Pencils

·         Paint Brush & Water

·         Ribbon, Buttons, Thread, extra Cotton Material

·         Piece of card the size of the case you are altering!

·         Iron & Paper

What to do next!

If you have a spare piece of cotton material, paint it with gesso a couple of times and you can use this as a practice piece to stamp on before you start stamping on your purse!

Make sure the purse you are altering is smooth before painting! If it has creases in it, give it an iron to smooth it out! The reason for this, is to have a flat surface to stamp on!

OK, ready to start!

(If you want to, cut a piece of paper the same size and shape of your purse, then design a layout of where you want your stamped images to go).

Onto the Purse

·         Place the piece of card inside the purse before you start painting! This stops the paint going through and sticking the purse together.

·         Paint one side of the purse and let it dry. Turn the purse over and paint the other side! Paint both sides again!

(This helps to make the surface of the cotton flatter to get a better stamped image)!

·         Once the purse is completely dry you can start stamping!

Just remember you won’t get a crisp image if you try and stamp too close to the edge of the purse where the hems are, as it is double material!

·         Use StaZon ink to stamp your images as this ink is permanent! Give the ink time to dry completely! About 10 mins!

·         Use the pencils to add colour to your stamped images. (You can soften the colours a little by using a damp not wet paintbrush to go over the colours! (Clean the brush between colour changes)!

·         When you have finished stamping and colouring leave the purse to dry over night!

·         Iron the purse with a dry medium heat iron, (no steam) between a piece of clean white paper (This stops the images from being transferred to your ironing board)!

·         Let the purse cool then paint a layer of Glue and Seal on both sides! Leave to dry for a good 4/6 hours! Better if you can leave overnight!

·         Decide what type of embellishments you want to sew onto the purse! Sewing on ribbon, beads, buttons etc!

·         On the Purse I posted on Facebook, I used the practice material to stamp and colour the same butterfly I stamped on the purse to make a 3D image on the purse!

                                              Pearl Flat buttons sewn on with brown cotton

Butterfly stamped and coloured on cotton material then cut out to form a 3D element to the Purse

Good Luck and Happy Crafting!

By the seaside, besides the sea!

Hello Everyone.
Today I have something a little different for you to look at! 
I have carried on with the theme of shoes and this time I have created them from Graphic 45 papers, By the Sea!

I really love these papers and am very loathed to cut into them, but thought it time to do something with them instead of being in my paper box!

I cut out the shoes with the Ballroom Sizzix die using a piece of Graphic 45 paper along with a piece of blue pearl card! I then found the images of the shells and the boys face from another piece of the G45 papers and them out and glued them into place using Pinflare glue gel to give them some dimension! I then had a rummage through my embellishments and found some silver charms in the shape of a ships wheel an anchor and a fish and attached them to the shoes using bakers twine! To finish off I used some small stick on pearls!

I then went on to make another pair of shoes with the smaller front to them and decided to alter a large peg to use as a stand for the shoes!

This time I decorated the front of the shoes with lace ribbons which I put little pleats into and added a couple of buttons! Ribbon was also added to the back of the shoes! Again I cut out an image of a ships wheel and I attached a small silver anchor.

I purchased a large decorated peg a little while ago and decided to alter it  first by sanding down the peg then painting it with white gesso! Once dry I covered the front and back of the peg with G45 paper! I then used a light blue ink to finish off the peg covering the white parts and the edges of the added paper! A strip of cream hessian was ruffled and then glued onto the peg.

Images of the mermaid and shells were cut out and glued in place!

I hope this will give you some ideas to play with.

Happy Crafting,

Sue x

''These Shoes Were Made For Walking...''

The Ruby Slippers seemed like such a hit that I've got some more to show you today! 

These are made out of Sizzix Die cuts (each shoe is 6'' long and 2.5" wide at the widest part) and can then be glammed up using diamonds, bows, brads or flowers. [see below]

I have had quite a few requests for the Die cuts so I have now put them in my shop. 

There are three pairs of die cuts per pack, with full instructions, and a video to follow! 

(At the moment, there are a packs of red, black and white but you can email me with your colour choice.)

Happy Crafting!